Description
Fits universally for almost all SAC clutches with 3- and 4-hole pitch available on the market.
Installed, for example, in VW-Audi, BMW, Mercedes, Volvo, Opel, Renault etc.
The clutch tool set is indispensable for the professional removal and installation of Self-Adjusting Clutches (SAC) and also enables the SAC adjustment ring in the clutch pressure plate to be reset.
Damage-free removal and installation is almost impossible without a SAC clutch tool, as the coupling can be strained or damaged in the process.
This inevitably leads to a malfunction or defect of the clutch, and it must be replaced.
The clutch centring tool included in the scope of delivery enables centring of clutch discs with a hub diameter of 15 - 28 mm and a guide bearing or crankshaft hole diameter of 12 - 28 mm.
Vehicles without guide bearings in the crankshaft are also not a problem.
The two clamping / centring elements ensure precise centring in the clutch disc on the first clamping element, and precise entering in the guide bearing or crankshaft hole on the second clamping element.
Even clutches with crankshaft hole diameter exceeding the clutch hub diameter can be centred cleanly and precisely.
Advantages:
• Professional and damage-free disassembly and assembly of the coupling!
• Precise centring of the clutch disc on vehicles without pilot bearings!
• Centring of the clutch disc towards the pilot bearing or towards the pressure plate is possible!
• The clutch centring tool included in the scope of delivery enables centring of clutch discs with a hub diameter of 15 - 28 mm and a guide bearing or crankshaft hole diameter of 12 - 28 mm.
• Resetting the adjusting ring is possible with the special reset tool!
